Here is a list of the 10 newest products added to our site.
-
Hydraulic Power Pack (SU181)
Satrind hydraulic power pack with oil cooler Motor 37kw 2950rpm Displacement 55 cm3/rpm Pump flow rate - 150 l/min 2950rpm Oil tank capacity 200 l Previously used on Satrind shredder.
$6,500 Price (inc GST): $7,150
Enquiry about Hydraulic Power Pack
Enter the security code shown above
-
Spindle Moulder (2834)
Wadkin Bursgreen BEM spindle moulder. Table 900mm x 1100mm, with 30mm interchangeable collars. 3.7kw 415 volt. Foot brake and spindle lock. With Frommia power feed unit 20-65f/m (4 speed). Machine manual, ex Govt. Weight approx 800kg.
$3,500 Price (inc GST): $3,850
-
Sub Arc Power Source (2833)
Lincoln DC-600 sub arc power source with leads/cables. Ex Govt. Checked and tested.
$2,200 Price (inc GST): $2,420
-
Punch and Shear (2832)
Kingsland 85XS Punch & Shear 85t rated capacity, punch (max) 33m in 20mm/55mm in 12mm plate, shear 380mm x 20/280mm x 15 flat, 150mm x 15 angle, 50mm round and square bar, notch 13mm thick. Touch and cut length stop. 7.5kw motor, weight 2430kg. Machine manual.
$12,500 Price (inc GST): $13,750
-
Horizontal Bandsaw (2831)
Meba SM-250 bandsaw, 250mm capacity, 250mm round, 250mm square, 250mm x 400mm rectangular. .55kw 415 volt. Mitre vice, made in Germany. Ex Govt.
$2,350 Price (inc GST): $2,585
-
Roll Mill (CGM182)
KHD Humboldt Wedag Roll Mill Type WM25-4-63/80HA, DOM 1997 800mm wide x 630mm roll dia 2 x 37kw motors Feed 90% less than 5mm, 100% less than 7-8mm Product 99% less than 1mm Throughput rate 24 t/h Comes with Lockers SH36 vibratory feeder with interface hopper.
-
Reel Mixer (MIX079)
Kuhn Knight 3036 Reel Mixer, approx 10m3 5 reel arms, 22kw main motor, hydraulic discharge door, separate power pack. Mixing chamber length 3300mm, Weight approx 4.2t.
$15,500 Price (inc GST): $17,050
-
Hammer Mill (CGM183)
Jeffery (BJD) Flex Tooth 24" x 20" hammer mill 20" wide
$5,000 Price (inc GST): $5,500
-
Twin Rotor Hammer Mill (CGM181)
JC Smale 15" twin rotor hammer mill, Rotor diameter approx 500mm, inlet 375mm x 500mm. Powered by 2 x 18hp motors. Comes with 2 new spare rotors with hammers.
$17,500 Price (inc GST): $19,250
-
Thicknesser (2830)
Durden T360 360mm width cut x 200mm max depth of cut. 415 volt, 2 speed feed. Australian made, ex govt.
$2,350 Price (inc GST): $2,585